Touch-screen use and maintenance affect the life of touch screens, we will use and maintenance of a number of touch-screen process should pay attention to matters of the list, hoping to be helpful to everyone. For the Touch Screen you want to know what problems can be in this message, we will conduct a professional answer.
One, touch-screen product
1, touch-screen membrane surface to touch the surface, that is, a positive product; glass surface a non-touch surface, that is, products on the back.
2, touch-screen part of the glass products, glass corner than the sharp in the assembly with gloves (finger) operations.
3, touch-screen part of the fragile glass materials, assembly not to exert great efforts to impact touch-screen.
4, to avoid direct take lead pick up the touch screen, to avoid pinout positions are pulling action.
5, pinout strengthen the board positions can not be bending action.
6, pinout does not allow any part of fold phenomenon, the assembly process of bending radius to be R> 1.5mm.
7, pinout in the assembly, it should be the level of insertion, not in strengthening the roots of the folded plate inserted.
8, pick and place products to be single operation, light-light, to avoid the collision between product surface scratches.
9, surface cleaning products, please use the soft cloth (chamois) dipped in petroleum ether wiping.
10, not use organic solvent wipe with a corrosive touch-screen film. Such as: wiping machine water, industrial alcohol.
11, wiping finger touch screen, please follow the direction of finger wipe, horizontal wipe can not cheat site.
12, Do not stack to place touch-screen.
13, in the assembly design and frame design, please note the following.
By:
About the Author:
